As the Chief Engineer and one of the founders, Mr Chen Jia Xing is the soul of our factory, who has been engaged in design and production of brush machines ever since the graduation from school. Till now, Mr Chen has accumulated over 25 years' experience in R&D and production of CNC brush making machines, he is particularly good at developing new machine models, such as 1-axis 2-head machine and dualpurpose 3-axis 2-head machine, etc. In conclusion, we are completely capable of customizing non-standard machines exactly according to customer's production requirements, not to speak of those standard machines for making daily cleaning brushes.
-
Manual Broom Trimming & Flagging Machine WXD-TM900
This WXD-TM900 is very popular machine model among broom manufacturers. It's equipped with two sets of flagging blades and a set of trimming blade inside. After trimming and flagging, all the broom filament-ends are not only flat and neat, but also split into many small strips. -
CNC 2-Axis Machine For Tufting Large Disk Brushes (Staple-Type) WXD-2A004
How big is the disk brush? Dear customers, the maximum diameter of disk brush it can make is 1200mm (1.2m)! As a 2-axis machine, the filaments are tufted vertically at 90 degrees, however, the plastic disk pieces could be molded with holes tilting at angles. -
2-Axis 3-Head Wood Brush Drilling And Tufting Machine WXD-2A3H01
If you want to make wood shoe brushes or other small flat brushes, and the original brush blocks are just without holes, this WXD-2A3H01 could be your top choice. It drills holes and tufts filaments synchronously. The maximum length of filaments (outside holes) allowed is 120mm. -
5-Axis 3-Head Household Cleaning Brush Making Machine WXD-5A3H01
Flat brushes, curved brushes, fan-shaped brushes, and even wavy brushes? Thinking of using only a machine to make various household cleaning brushes? This 5-axis machine WXD-5A3H01 might be one of your perfect choices! Compared with a 2-axis/3-axis/4-axis machine, it's just the most flexible one! -
2-Axis 2-Head Long Strip Brush Drilling And Tufting Machine WXD-2A2H03
It's used to make those long wood/plastic strip brushes, the maximum length of strip brush piece allowed is 2 meters. There are four grippers holding four strip brushes on worktable, consequently it makes strip brushes continually, non-stop. Of course it also makes short strip brushes, as long as grippers are changed. -
High-Speed 2-Axis Scrub Brush Filling Machine WXD-2A002
When making scrub brushes, its maximum filling speed is 8 holes per second. There are four grippers holding four scrubbing brushes on worktable. Besides scrub brushes, it can also make other flat brushes, such as plastic brooms and other small polishing brushes. -
5-Axis 3-Head Spherical Toilet Brush Making Machine WXD-5A3H07
It's a typical model for making spherical toilet brushes and double side hockey brushes.What's more, the operator could also use it to produce wood/plastic brooms, as long as changing the worktable. It's also the most flexible one. -
CNC 4-Axis Broom Tufting Machine For 180mm Filaments WXD-4A004
This is a big-sized 4-axis broom tufting machine, used to make those plastic brooms with very long filaments. The maximum length of filaments (outside holes) it processed is 180mm, while our other standardized machines only process 120mm filaments. -
CNC 5-Axis 2-Head Broom Making Machine With Safety Cover WXD-5A2H01
Some broom manufacturers use plastic broom pieces which are already molded with holes in advance, while some use plastic broom pieces molded without holes. If you are the latter, please take a look at this 5-axis broom machine, it could be one of your choices. -
2-Axis High-Speed Scrub Brush Tufting Machine (Flat-Wire) WXD-2A006
If operator wants to make several different scrub brush models by the same tufting machine, and if the shapes of those scrub brushes are just similar, it's possible that he doesn't need to change the grippers, what he need do is just slightly adjusting the grippers. -
3-In-1 2-Axis 2-Head Strip Brush Drilling And Tufting Machine WXD-2A2H05
This is an integrated machine with functions of drilling, tufting and trimming, used to make strip brushes. Drilling holes, tufting filaments and trimming filaments are all done by this machine! The hole positions are divided averagely by "Divide" button in programming. -
4-Axis Ball-Type Toilet Brush Tufting Machine With Side Worktable WXD-4A009
This is the latest model of CNC 4-axis toilet brush tufting machine with side worktable, the tufting method is anchor-type (flat wire). The major difference between WXD-4A001 and WXD-4A009 is the direction of worktable. Click to see its overall technical details. -
4-Axis Plastic Broom Tufting Machine With Safety Cover WXD-4A003
With safety cover, this WXD-4A003 is used to make those quality brooms which are thick and heavy. There are two grippers holding two brooms on worktable, which are tufted in turn. This is a standardized one, the maximum length of filaments (outside holes) allowed is 120mm. -
CNC 4-Axis Double-Side Hockey Brush Tufting Machine With Side Worktable WXD-4A007
It's a CNC 4-axis double-side hockey brush tufting machine of the latest style, with side worktable, also with servo motors, its fastest tufting speed is 6 holes per second. In program, hole positions are entered by hand-controller, one hole by one hole. -
Industrial Roller Brush Drilling And Filling Machine WXD-2A2H01
Most of the industrial roller brushes you plan to make are longer than 30cm but shorter than 100cm? If so, this WXD-2A2H01 might be the best choice for you! The maximum length of roller brush base processed is 125cm, while the maximum diameter of roller brush base (without filaments) processed is 10cm. To produce much bigger roller brushes, another WXD2A2H04 is recommended.
As a completely new hand, having a lot of questions about brush machines?
Not knowing what is "Origin"? What are the differences among 2-axis, 3-axis, 4-axis and 5-axis brush machines? Totally how many different programs could be saved on computer? How to delete a repeated hole? How to change the position of an already-existing hole?
No matter you have doubts about programming or mechanical parts, please take a look at our support column at first.
If you cannot find a satifactory answer, please directly contact us at 0086 136 2276 8856 (WeChat, Skype, Viber) or chloe@brushmachine1.com, it'll be our great pleasure to hear from you.
WhatsApp is blocked in China, WeChat and Skype are strongly recommended.
Guangdong Wangxinda Machines Co., Ltd. --- China's Leading Factory Of CNC Brush Machines
Contact: Ms Chloe Wong, Int'l Sales Email: chloe@brushmachine1.com Mob / WeChat / WhatsApp: 0086 136 2276 8856 QQ: 710632185
Contact: Mr Hase Chen, Int'l Sales Email: hase@brush-machine.com Mob / WeChat / WhatsApp: 0086 182 1860 2158 QQ: 529220975
Telephone/Fax: 0086 20 86328033 English Web: www.brushmachine1.com Chinese Web: www.brushmachine1.com/cn
Address: Room 101, No. 6 Baihualing Industrial Park, No. 1 Baihuahaoyuan Street, Wanggang, Baiyun District, Guangzhou, Guangdong, China. P.C.: 510440
Guangdong Wangxinda's New Website With Chinese Version, Launched In May 2017.
粤ICP备19161008号
