Which Brooms Can WXD-4A004 Make?
| Broom Shapes | Brooms with flat, curved and fan-shaped surfaces |
| Molded Holes | Plastic broom pieces should be already molded with holes in advance |
| Angle of Holes | Holes are molded, could be vertical at 90 degrees or tilting at any angles |
| Broom Size | 400mm (Length) x 100mm(Width), other size could be customized |
General Introduction of CNC Big-Sized 4-Axis Broom Tufting Machine WXD-4A004
1) This is a big-sized broom tufting machine, the maximum length of filaments (outside holes) allowed is 180mm, while our standardized machines only process 120mm filaments.
2) It can tuft flat, curved and fan-shaped brooms. To change to make different broom models, operator just need change grippers accordingly. Please kindly note that only a set of grippers is offered with the broom machine together, free of charge, other extra grippers will be charged.
3) There are two grippers holding two brooms on worktable. Under "Automatic Mode", it makes plastic brooms continually, non-stop. Under "Semi-Auto Mode", it stops after it finishes a working cycle (making two brooms), and it doesn't resume working until operator presses "Start", which is suitable for a new hand.
4) Also note that the plastic broom pieces should be already molded with holes in advance. This is a tufting machine only, it can't drill holes.
5) If you still have any further question, please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll do our best to get back to you at the earliest.
Technical Parameters of CNC 4-Axis Broom Tufting Machine (Staple-Type) WXD-4A004
| Standard Processing Area | X-axis x Y-axis x Z-axis x A-axis = 400mm (Length) x 200mm (Width) x 100mm x 360° |
| Materials of Broom Pieces | Plastic |
| Materials of Broom Filaments | PP, PVC, PET, nylon, pig bristles, stainless steel wires, copper wires, horse hair, tampico |
| Length of Broom Filaments | 10mm - 180mm (outside holes) |
| Diameter of A Single Filament | 0.08mm - 1.2mm |
| Diameter of Holes | 3mm - 6mm |
| Colors of Broom Filaments | Either 1 color or 2 colors |
| Maximum Tufting Speed | 4 Holes per second |
| Tufting Method | Anchor type (flat wire) or staple type (round wire), optional |
| Motors | Panasonic servo motors |
| Programming | The hole positions are entered by hand-controller, one hole by one hole |
| Quantity of Programs Saved | It saves totally 84 programs for different broom models |
| Changeable Grippers | Operator could make many other broom models, as long as he changes grippers accrodingly |
| Hitech Touchable Screen | 5.4'' touchable screen, interface is in English and Chinese, other language could be customized |
| Adjusting Speed | Variable-frequency stepless adjustable speed |
| Power Supply | Single-phase 220V or 3-phase 380V, 50-60Hz, 600W |
| Packing | Wood case for machine body: 1.5m (Length) x 1.52m (Width) x 2.1m (Height) Wood case for computer: 0.65m (Length) x 0.65m (Width) x 1.5m (Height) |
| Gross Weight | Around 400KGS |
Maintenance of Big-Sized 4-Axis Broom Tufting Machine (Staple-Type) WXD-4A004
1) Operator should often add lubrication oil to the working parts of this 4-axis big-sized broom tufting machine, so as to decrease abrasion.
2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.
3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.
4) Be sure that the electric box works under ventilative conditions; do not put this broom tufting machine under humid or high-temperature conditions; do not shake the electric box.
5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.
6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.
7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.
8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wire rudely, either.
9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.
-
***Mac2023.09.18How would you advise me as I'm interested on venturing in broom making In Kenya.
Which machine is preferable for a small scale starter with a fair price? -
Chloe (Int'l Sales)2023.10.05
Dear ***mac, it's a pleasure to receive your business inquiry and thanks for your interest in our broom machines. 1) If you are a small-scale starter, we'd like to recommend a 2-axis broom tufting machine, both its technical parameters and video links were already sent to you via email, please kindly check them. 2) That machine recommended is economical, and it's one of the most popular models among plastic broom manufacturers, many of our Chinese, Kenyan, Pakistani, Indian and Sri Lankan customers have this machine in their workshops. 3) Also please be kindly informed that it makes flat brooms only, all the tufting areas should be horizontally flat. It can't make curved and fan-shaped brooms. 4) To save manpower, you could also kindly consider this 2-axis broom filling machine with automatic feeding system, the price was also already included in the quotation sheet. For any further question or doubt, please do not hesitate to let us know, we'll be glad to. Kind Regards!
-
***har2017.08.02Dear sir, We are a broom making factory based in EL oued south East Algeria. We plan to renew our factory by new automatic or Semi automatic broom drilling machines . So if you have available some machines ,please do not hesitate to send us an offer containing specifications ,photoes and prices . Kind Regards.
-
Chloe (Int'l Sales)2017.08.03
Dear ***har, glad to receive your inquiry, and thanks for your interest in our machines. 1) We already sent you the prices for several typical broom making machines by email, along with their technical details, photos and video demonstrations. Could you check your email, please? 2) It'll be so great, if you could also kindly send us the photos of your broom models, so that we could confirm which machine is the most suitable one for your case. Sincerely looking forward to hearing from you. Best Regards!
Guangdong Wangxinda Machines Co., Ltd. --- China's Leading Factory Of CNC Brush Machines
Contact: Ms Chloe Wong, Int'l Sales Email: chloe@brushmachine1.com Mob / WeChat / WhatsApp: 0086 136 2276 8856 QQ: 710632185
Contact: Mr Hase Chen, Int'l Sales Email: hase@brush-machine.com Mob / WeChat / WhatsApp: 0086 182 1860 2158 QQ: 529220975
Telephone/Fax: 0086 20 86328033 English Web: www.brushmachine1.com Chinese Web: www.brushmachine1.com/cn
Address: Room 101, No. 6 Baihualing Industrial Park, No. 1 Baihuahaoyuan Street, Wanggang, Baiyun District, Guangzhou, Guangdong, China. P.C.: 510440
Guangdong Wangxinda's New Website With Chinese Version, Launched In May 2017.
粤ICP备19161008号
