Home

Which Brooms Can WXD-2A005 Make?

General Introduction of CNC High-Speed 2-Axis Plastic Broom Tufting Machine WXD-2A005

1) This broom machine WXD-2A005 is the most popular model among broom manufacturers, mostly it's used to make those thin and light plastic brooms. The maximum tufting speed is 7 holes per second, and its tufting method is anchor-type (flat wire). With two grippers holding two brooms on worktable, it works continuously under "Automatic Mode", non-stop.

2) It processes filaments in two colors. The maximum length of filaments (outside holes) allowed is 110mm, other size could be customized.

3) In program, positions of broom holes are manually entered by hand-controller, one hole by one hole. Hole positions could be deleted, inserted, duplicated, moved.

4) Operator could also use it to make many other small brushes with flat surfaces, as long as grippers are changed accordingly. Please note that only a set of grippers is offered together with the broom machine, free of charge, other extra grippers will be charged.

5) If you are not sure whether this 2-axis broom machine is your best choice, please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, it'll be our great pleasure to get back to you with a professional solution.

Technical Parameters of CNC High-Speed 2-Axis Plastic Broom Tufting Machine WXD-2A005

Daily Output Of Brooms

Let's take this flat broom model as an example. It's a very typical broom model with 120 holes. If operator uses our broom tufting machine WXD-2A005 for production, the daily output could easily reach up to 1500 pcs within 8 hours in a working day, which is calculated according to 6 holes per second.

Maintenance of High-Speed 2-Axis Plastic Broom Tufting Machine WXD-2A005

1) Operator should often add lubrication oil to the working parts of this plastic broom making machine, so as to decrease abrasion.

2) Operator should regularly check each part of this broom filling machine to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this broom machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.

Another New Broom Machine Model Was Developed!

We've already developed another new broom filling machine WXD-2A001, which is equipped with automatic broom-bases feeding system.

We all know it's quite normal that each operator is responsible for running a broom machine during the daily production, however, if using the new model WXD-2A001 instead, an operator is completely capable of running two broom machines synchronously, thus which effectively helps the manufacturer cut the labor cost.

You might be interested to take a look at the workshop of a customer who uses 6 sets of our broom machines WXD-2A001 for massive production.

Interted to know further details about broom filling machine WXD-2A001? Please do not hesitate to contact us at chloe@brushmachine1.com or just leave a message on this page, it'll be our great pleasure to get back to you at the earliest.