-
Dear customers, thanks for coming to our website, and we appreciate your interest in our brush machines . Here are the packing details for your reference. Firstly, both the computer and the machine-body are packed by a layer of PE film, which prevents the machine from rusting. Secondly, by wood cases. Normally a machine is packed into two cases, one for computer, the other for machine-body. If you still have any further question or doubt abo...
-
Theoretically speaking, as long as operator meets two necessary conditions listed below, he could use a machine to make thousands of different brush models of which the sizes are within the rated range. 1) For each different brush model, operator must have ready grippers which match the brush model perfectly. (Please note that only a set of grippers is offered with the brush machine together, free of charge, other extra grippers will be charged.) 2) Operator must set up corresponding...
-
Yes, dear customer, you need to set up separate programs for all different brush models. For example, if an operator uses a 2-axis broom tufting machine to make totally 10 different broom models, accordingly he must set up 10 different programs. In the computer system of our brush machines , programs are saved and named by File Numbers, thus they are also recognized by File Numbers. (Programs cannot be named by letters) For example, operator saves the program of a red broom m...
-
Dear customer, please follow the below steps to open an already-existing program. 1) Press "Files" 2) Press the place where a red arrow is marked to select a number. For example, operator presses "8" (it means that operator is going to open File 8) —— Press "Ent (Enter)" 3) Press "Open" 4) Press "Exit". If you still have any further question regarding the program of our brush machines , please do feel free to contact us at chloe@brushmachine1.com or ...
-
After finishing the new program under "Teach" mode, please follow the steps listed below to save it. 1) Press "Files". 2) Press the place where a red arrow is marked to select a file number. For example, operator presses "8" (it means that the new program will be saved as File 8) —— press "Ent (Enter)". 3) Press "Save". 4) Press "Exit". If you still have any further question regarding the programming of our brush machines , please do feel free to conta...
-
Do You Offer Flat Wires And Round Wires For Your Brush Machines? What's The Size Of Flat/Round Wire?Dear customer, yes, we also offer flat wires and round wires for our brush machines . For your information, here are the relevant details of the wires we normally use. Flat Wire Galvanized iron wire 0.35mm (Thickness) x 1.8mm (Width) For 3mm holes Coppering iron wire 0.6mm (Thickness) x 2.0mm (Width) For 4mm holes Round Wire Galvanized iron wire 0.6mm (Diameter) For 3mm holes 0.7mm (Diameter) For 3.2mm and 3.5mm holes 0.8mm (Diameter) For 4mm holes ...
-
Dear customers, thanks for coming to our website, yes, we also offer drill bits for brush machines , please just send your detailed requirements to chloe@brushmachine1.com , such as: 1) Drill plastic or wood? 2) What are the hole sizes? 3mm? 4mm? After receiving your requirements, we'll be glad to send you the quotations accordingly. Any further question, please do feel free to contact us, it'll be our pleasure to get back to you at the earliest.
-
Dear customers, thanks for your interest in our CNC brush machines , here are the details: On our 2-axis machines , operator could save 87 different programs. On our 3-axis machines , operator could save 40 different programs. On our 4-axis machines , operator could save 33 different programs. On our 5-axis machines , operator could save 9 different programs. If operator wants to save more than 9 programs, we suggest using an extra saving card. If you have any ...
-
Dear customers, it means the origin of the coordinate, it's the position of "0" on the coordinate. For all our brush machines , no matter it's a 2-axis, 3-axis, 4-axis or 5-axis machine, all the axes work according to a standardized position -- "Origin(0)" of the coordinate! Basing on "Origin (0)", all the program data is thus calculated precisely. Under these situations, operator should press "Origin": 1) After turning on the computer; 2) Before using ...
-
Dear customers, yes, all our brush drilling & tufting machines should be connected with an air-compressor. When running our brush machines, air-pressure is used under these situations: 1) Lock and unlock grippers; 2) The filament-box moves up and down to change color for filaments; 3) H-axis moves up and down. We'd like to suggest using an air-compressor which could generate air-pressure around 85.35 PSI - 113.80 PSI, equal to 6 KGF/CM2 - 8 KGF/CM2. For reference, 1 P...
-
Gripper is a kind of fixture, made of aluminum-alloy, used to hold brush pieces and fix them tightly on the worktable of brush making machines , here are some examples: Grippers for curved brooms Grippers for small flat brushes As you could see from the above pictures, grippers are made exactly according to the brush shapes. If the brush shapes are similar, it's possible for operator to use the same grippers to make another similar brush ...
-
Dear customers, yes, we do offer some consumable spare parts for each of our brush machines , free. Here is the list of the consumable spare parts for our flat-wire machines, offered with the machine together, free of charge: 1 Pair of bristle-mouth; 1 Piece of moving-blade (cutter); 1 Piece of bristle-picker; 1 Piece of bristle-leaning block; 1 Piece of tufting-needle head; 1 Piece of tufting-needle pole; 1 Piece of fixed-blade; 1 Piece of alloy wire-feeding block; 1 Piece of...
-
For all kinds of CNC brush machines , normally the working principle is like this: The left/right movements of worktable are supported by X-axis; The forward/backward movements of worktable are supported by Y-axis; The rotating movements of worktable are supported by Z-axis; The up/down movements of worktable are supported by H-axis; The swinging movements of worktable are supported by A-axis. 2-axis machine s includes X-axis and Y-axis; usually they are used to ...
Guangdong Wangxinda Machines Co., Ltd. --- China's Leading Factory Of CNC Brush Machines
Contact: Ms Chloe Wong, Int'l Sales Email: chloe@brushmachine1.com Mob / WeChat / WhatsApp: 0086 136 2276 8856 QQ: 710632185
Contact: Mr Hase Chen, Int'l Sales Email: hase@brush-machine.com Mob / WeChat / WhatsApp: 0086 182 1860 2158 QQ: 529220975
Telephone/Fax: 0086 20 86328033 English Web: www.brushmachine1.com Chinese Web: www.brushmachine1.com/cn
Address: Room 101, No. 6 Baihualing Industrial Park, No. 1 Baihuahaoyuan Street, Wanggang, Baiyun District, Guangzhou, Guangdong, China. P.C.: 510440
Guangdong Wangxinda's New Website With Chinese Version, Launched In May 2017.
粤ICP备19161008号
Mobile Terminal
