Besides CNC brush drilling & tufting machines, there are also some other small auxiliary machines which are usually included in brush production, such as pneumatic cutting machine used to cut filaments into certain length; trimming machine used to trim and flatten the filament-ends in order to keep all the filament-ends neat and flat; and flagging machine used to split the filament-ends into many small pieces so that the filament-ends could sweep away dust more efficiently, etc. Most of our machines were already recorded with videos, you are warmly welcome to watch the video demonstrations, and please do feel free to send your inquiries to chloe@brushmachine1.com
-
Manual Disk Brush Trimming Machine WXD-TM700
This WXD-TM700 is used to trim disk brushes to make all the filament-ends flat, manually. Its blade is made of imported steel with excellent tenacity, being abrasion-resistant. The blade could rotate in both clockwise and counterclockwise directions. -
Pneumatic Filaments Cutting Machine WXD-C80
This pneumatic filaments cutting Machine WXD-C80 is used to cut monofilaments and bristles for various kinds of brushes. Please note that it cannot cut copper wires or stainless steel wires. It's pneumatic, should be connected with an air-compressor. -
Automatic Spherical Toilet Brush Trimming Machine With Safety Cover WXD-TM8088
This WXD-TM8088 is equipped with two sets of trimming units inside, thus it trims two spherical toilet brushes synchronously, which brings higher working efficiency. After trimming filament-ends, both the two toilet brushes are automatically ejected from the grippers. -
Manual Broom Trimming & Flagging Machine WXD-TM900
This WXD-TM900 is very popular machine model among broom manufacturers. It's equipped with two sets of flagging blades and a set of trimming blade inside. After trimming and flagging, all the broom filament-ends are not only flat and neat, but also split into many small strips. -
Single Side Hockey Brush (Curved Toilet Brush) Trimming Machine WXD-TM200
It's so simple and easy to run this toilet brush trimming machine. After putting a curved toilet brush into the gripper, operator just needs to step on the foot switch to automatically lock the brush piece to be trimmed. After trimming, operator releases the foot switch to take away the processed brush. -
Small Roller Brush Trimming Machine With Foot Switch WXD-TM500
The maximum size of roller brush processed by this WXD-TM500 is 500mm(Length) x 150mm(Dia), other size could be customized. Operator just needs to step on the foot switch to start trimming. After trimming, the machine automatically stops to let operator take out the finished brush. -
CNC 1-Axis 2-Head Strip Brush Drilling And Tufting Machine WXD-1A2H01
No matter the strip brush piece is 20m, 50m, 100m or even 200m long, this machine can process it smoothly without problem, there is just no limit to the length of the strip brush piece! Its tufting method is staple-type (round wire). -
Automatic Wave-Shaped Roller Brush Trimming Machine WXD-TM400
Want to make wave-shaped roller brushes? Absolutely you'll need this automatic brush trimming machine WXD-TM400, which is used to trim roller brushes to let them become wave-shaped. It trims roller brushes with filaments made of nylon, pig bristles, horse hair, tampico, etc. -
Automatic Roller Brush Trimming Machine WXD-TM600
It's an automatic roller brush trimming machine, used to trim those big and long industrial roller brushes, the maximum length of a roller brush base allowed is 1.5m, and the maximum diameter of a roller brush base (without filaments) is 80mm. -
Manual Brush/Broom Trimming Machine WXD-TM100
This WXD-TM100 is a manual trimming machine, used to trim brooms and other brushes with nylon filaments, horse hair, tampico filaments, etc, so as the keep all the filament-ends flat. The blades are made of imported steel with excellent tenacity, being abrasion-resistant. -
Flagging Machine (Broom-Filament-Ends Splitting Machine) WXD-DT360
This flagging machine is used to split the filament-ends into many small pieces, so that the filament-ends could sweep away dust more efficiently. Normally, only PET filaments could be flagged, it cannot process stainless steel wires, copper wires or abrasive wires. -
Spherical Toilet Brush Trimming Machine WXD-TM300
This WXD-TM300 is used to trim the filament-ends of spherical toilet brushes, so as to keep the filament-ends neat. It trims toilet brushes with filaments made of PP, PVC, PET, bristles, etc, please note that the diameter of a single filament can't be thicker than 1.2mm. -
Pneumatic Filaments Cutting Machine With Big Calibre WXD-C90
How to cut brush filaments? This pneumatic filaments cutting machine should be a perfect choice! Being pneumatic, it must be connected to an air compressor when working. Operator just needs to step on the foot switch to cut off brush filaments, which is so simple! -
Automatic Broom Trimming And Flagging Machine WXD-TM800
Trimming, is cutting the filament-ends, so as to keep all the broom filament-ends flat. Flagging, is splitting the filament-ends into many small pieces, so that the split broom filament-ends could sweep away dust more efficiently. Click to see more details.
Guangdong Wangxinda Machines Co., Ltd. --- China's Leading Factory Of CNC Brush Machines
Contact: Ms Chloe Wong, Int'l Sales Email: chloe@brushmachine1.com Mob / WeChat / WhatsApp: 0086 136 2276 8856 QQ: 710632185
Contact: Mr Hase Chen, Int'l Sales Email: hase@brush-machine.com Mob / WeChat / WhatsApp: 0086 182 1860 2158 QQ: 529220975
Telephone/Fax: 0086 20 86328033 English Web: www.brushmachine1.com Chinese Web: www.brushmachine1.com/cn
Address: Room 101, No. 6 Baihualing Industrial Park, No. 1 Baihuahaoyuan Street, Wanggang, Baiyun District, Guangzhou, Guangdong, China. P.C.: 510440
Guangdong Wangxinda's New Website With Chinese Version, Launched In May 2017.
粤ICP备19161008号
