Which Brushes Can WXD-2A2H05 Make?
| Brush Shapes | Flat strip brushes only |
| Drilled Holes | Original brush pieces are without holes, holes are to be drilled by this machine |
| Angle of Holes | Holes are vertical to brush surface at 90 degrees only, holes can't be tilting |
| Brush Size | Unrestricted (Length) x 1 or 2 holes only (Width) |
General Introduction of CNC 3-In-1 2-Axis 2-Head Strip Brush Drilling & Tufting & Trimming Machine WXD-2A2H05
1) WXD-2A2H05 is an integrated machine with functions of drilling, tufting and trimming, used to make plastic/wood strip brushes (elevator brushes). Drilling holes, tufting filaments and trimming filaments are all done by this machine, which greatly improves working efficiency.
2) If you are still not sure whether it could make your own strip brush model, please do not hesitate to contact us at chloe@brushmachine1.com or just make a telephone call, it'll be our great pleasure to hear from you and advise you a professional solution.
Technical Parameters of 3-In-1 2-Axis 2-Head Strip Brush Making Machine WXD-2A2H05
| Standard Processing Area | X-axis x Y-axis = Unrestricted (Length) x 1 or 2 holes only (Width) |
| Materials of Brush Pieces | Plastic, wood |
| Materials of Brush Filaments | PP, PVC, PET, nylon, pig bristles, stainless steel wires, copper wires, horse hair, tampico |
| Length of Brush Filaments | 10mm - 110mm (outside holes) |
| Diameter of A Single Filament | 0.08mm - 1.2mm |
| Diameter of Holes | 3mm - 6mm |
| Colors of Brush Filaments | Either 1 color or 2 colors |
| Maximum Working Speed | 4 Holes per second |
| Tufting Method | Anchor type (flat wire) or staple type (round wire), optional |
| Motors & Driver | Panasonic servo motors and Panasonic drivers |
| Data Input (Programming) | Hole positions on each circle are divided averagely by "Divide" button in program |
| Quantity of Programs Saved | It saves totally 84 programs for different brush models |
| Changeable Grippers | Operator could make other similar strip brush models, as long as he changes grippers accrodingly |
| Hitech Touchable Screen | 5.4'' touchable screen, interface is in English and Chinese, other language could be customized |
| Adjusting Speed | Variable-frequency stepless adjustable speed |
| Power Supply | Single-phase 220V or 3-phase 380V, 50-60Hz, 600W |
| Packing | Wood case for machine body: 1.62m (Length) x 1.52m (Width) x 1.9m (Height) Wood case for computer: 0.65m (Length) x 0.65m (Width) x 1.5m (Height) |
| Gross Weight | Around 300KGS |
Maintenance of CNC 3-In-1 2-Axis 2-Head Industrial Strip Brush Making Machine WXD-2A2H05
1) Operator should often add lubrication oil to the working parts of this strip brush machine, so as to decrease abrasion.
2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.
3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.
4) Be sure that the electric box works under ventilative conditions; do not put this strip brush making machine under humid or high-temperature conditions; do not shake the electric box.
5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.
6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.
7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.
8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.
9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.
Guangdong Wangxinda Machines Co., Ltd. --- China's Leading Factory Of CNC Brush Machines
Contact: Ms Chloe Wong, Int'l Sales Email: chloe@brushmachine1.com Mob / WeChat / WhatsApp: 0086 136 2276 8856 QQ: 710632185
Contact: Mr Hase Chen, Int'l Sales Email: hase@brush-machine.com Mob / WeChat / WhatsApp: 0086 182 1860 2158 QQ: 529220975
Telephone/Fax: 0086 20 86328033 English Web: www.brushmachine1.com Chinese Web: www.brushmachine1.com/cn
Address: Room 101, No. 6 Baihualing Industrial Park, No. 1 Baihuahaoyuan Street, Wanggang, Baiyun District, Guangzhou, Guangdong, China. P.C.: 510440
Guangdong Wangxinda's New Website With Chinese Version, Launched In May 2017.
粤ICP备19161008号
