Home

Which Brushes Can WXD-2A2H03 Make?

General Introduction of CNC 2-Axis 2-Head Wood/Plastic Strip Brush Making Machine WXD-2A2H03

1) This WXD-2A2H03 is used to make those long industrial strip brushes, the maximum length of strip brush piece allowed is 2 meters, the maximum width of brush piece allowed is 80mm, and, of course it also makes normal short strip brushes. 

2) Both its tufting-head and drilling-head work synchronously. There are four grippers holding four brushes on worktable. In turns, the machine always works on two grippers, so that operator could take out the finished brush pieces from anther two grippers and put in new brush pieces to be processed, by this way, the machine keeps working continually, non-stop.

3) The positions of holes are divided averagely by "Divide" button in program, operator just need enter positions of the first hole and the last hole in the same line, which saves time and is very convenient.

Technical Parameters of 2-Axis 2-Head Industrial Roller Brush Making Machine WXD-2A2H03

Maintenance of 2-Axis 2-Head Industrial Strip Brush Making Machine WXD-2A2H03

1) Operator should often add lubrication oil to the working parts of this 2-axis strip brush machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this strip brush making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.