Home

Which Brushes Can WXD-4A3H03 Make?

General Introduction of CNC 4-Axis 3-Head Disk Brush Making Machine With Safety Cover WXD-4A3H03 

1) If your original plastic/wood disk brush pieces are molded without holes, this 4-axis 3-head disk brush making machine WXD-4A3H03 might be your best choice. With two drilling-heads and a tufting-head, it drills holes and tufts filaments synchronously. The maximum diameter of disk brush piece allowed is 500mm, other size could be customized.

2) As a 4-axis machine, the holes and filaments could be made either vertical at 90 degrees or tilting at different angles, it's adjustable. After it finishes a brush, the machine must stop to let operator take away the finished brush piece and put into a new brush piece to be processed, as it only has two grippers holding two disk brushes on worktable.

3) It's equipped with automatic vacuum cleaner and manual lubrication system.

4) Feeling interested to know much more details about this CNC 4-axis 3-head disk brush making machine? please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll try our best to get back to you with a professional solution.

Technical Parameters of CNC 4-Axis 3-Head Disk Brush Drilling And Tufting Machine With Safety Cover WXD-4A3H03

Maintenance of CNC 4-Axis 3-Head Disk Brush Making Machine WXD-4A3H03

1) Operator should often add lubrication oil to the working parts of this disk brush machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this disk brush making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.