Home

Which Brushes Can WXD-4A008 Make?

General Introduction of CNC 4-Axis Disk Brush Tufting Machine WXD-4A008 

1) This is a very popular model for making industrial disk brushes. The maximum diameter of disk allowed is 500mm, other size could be customized.

2) Filaments are either vertical to the brush surface at 90 degrees, or tilting at other angles, it's optional, operator just need adjust the program according to the disk brush model. Please also note that the plastic disk brush pieces should be already molded with holes in advance, as this is a tufting machine only, it can't drill holes. If the original plastic disk brush pieces are without holes, a 4-axis 3-head disk brush drilling and tufting machine is strongly recommended.

3) If you have some further questions regarding disk brush making machine, please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll try our best to reply to you at the earliest.

Technical Parameters of CNC 4-Axis Disk Brush Tufting Machine With WXD-4A008

Maintenance of 4-Axis Disk Brush Tufting Machine (Staple-Type) WXD-4A008

1) Operator should often add lubrication oil to the working parts of this disk brush making machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this disk brush machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.