Home

Which Brushes Can WXD-4A009 Make?

General Introduction of CNC 4-Axis Ball-Type Toilet Brush Tufting Machine With Side Worktable WXD-4A009 

1) This is the latest model of 4-axis toilet brush tufting machine with side worktable, the tufting method is anchor-type (flat wire). There are two grippers holding two brushes on worktable. Under "Automatic Mode", it tufts toilet brushes continually, non-stop, and the new feature is that it automatically pushes out the finished brushes! Please do remember to watch its video demonstration.

However, under "Semi-Auto Mode", it stops after it finishes a brush, and it doesn't resume working until operator presses "Start" on the screen, which is more suitable for a new hand.

2) Also note that the plastic toilet brush pieces should be already molded with holes in advance. This is a tufting machine only, it can't drill holes.

3) If you still have any further question, please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll do our best to reply to you at the earliest.

Technical Parameters of CNC 4-Axis Toilet Brush Machine With Side Worktable WXD-4A009

Maintenance of 4-Axis Toilet Brush Making Machine With Side Worktable WXD-4A009

1) Operator should often add lubrication oil to the working parts of this toilet brush machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this toilet brush machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.