Home

Which Brushes Can WXD-2A3H01 Make?

General Introduction of CNC 2-Axis 3-Head Wood Brush Making Machine WXD-2A3H01

1) With two drilling heads and a tufting head, this WXD-2A3H01 drills holes and tufts filaments synchronously. Normally it's used to make wood shoe brushes, snow cleaning brushes, and other small brushes with flat surfaces. In fact, theoretically operator could use it to make hundreds of different flat brush models, as long as he changes grippers accordingly. Please note that only a set of grippers is offered with the machine together, other extra grippers will be charged. 

2) There are three grippers installed on worktable. When the machine is working, in turn, it always processes on two grippers only, another gripper is left unprocessed, so that operator could pick out the finished brush from it and put in another brush block to be processed. Please watch the video demonstration, you'll fully understand it.

3) This wood brush making machine WXD-2A3H01 is also installed with automatic vacuum cleaner and manual lubrication system. If you are still not sure whether it could make your own brush model, please do feel free to contact us at chloe@brushmachine1.com or just make a telephone call, it'll be our great pleasure to hear from you.

Technical Parameters of 2-Axis 3-Head Wood Brush Drilling And Tufting Machine WXD-2A3H01

Maintenance of 2-Axis 3-Head Wood Brush Making Machine WXD-2A3H01

1) Operator should often add lubrication oil to the working parts of this wood brush making machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this 2-axis wood brush making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.