Home

Which Brushes Can WXD-2A006 Make?

General Introduction of CNC 2-Axis High-Speed Scrub Brush Tufting Machine WXD-2A006

1) This 2-axis high-speed tufting machine WXD-2A006 is the most popular model among brush manufacturers! In most cases, they use WXD-2A006 to make scrub brushes and those thin and light brooms. The maximum tufting speed is 8 holes per second, and its tufting method is anchor-type (flat wire). With two grippers holding two scrub brushes on worktable, it works continually under "Automatic Mode", non-stop.

2) It processes filaments in two colors. The maximum length of filaments (outside holes) allowed is 120mm, other size could be customized.

3) In program, each hole position on the scrub brush piece is manually entered by hand-controller, one hole by one hole. Hole positions could be deleted, inserted, duplicated, moved.

4) Operator could also use it to make many other small brushes with flat surfaces, as long as grippers are changed accordingly. Please note that only a set of grippers is offered together with this scrub brush tufting machine, free of charge, other extra grippers will be charged.

5) If you are not sure whether this high-speed scrub brush tufting machine is your best choice, please do not hesitate to contact us at chloe@brushmachine1.com or just leave a message on this page, it'll be our great pleasure to get back to you with a professional solution.

Technical Parameters of CNC 2-Axis High-Speed Scrub Brush Tufting Machine WXD-2A006

Maintenance of 2-Axis Scrub Brush Tufting Machine (Flat-Wire) WXD-2A006

1) Operator should often add lubrication oil to the working parts of this scrub brush tufting machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this scrub brush making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.