Home

General Introduction Of CNC 4-Axis Plastic Broom Filling Machine WXD-4A002

1) Is it possible to use a machine to produce most different broom models in the market? Yes, absolutely. As a 4-axis filling machine, this WXD-4A002 can make flat brooms, curved brooms, fan-shaped brooms, irregularly fan-shaped brooms and even wavy brooms, as displayed in the below photo. Furthermore, all the filaments are made tilting at different angles, which look perfectly radial. However, please be kindly informed that all the plastic broom bases should be already moulded with holes in advance.

2) The maximum filling speed is 6 holes per second, and its tufting method is anchor-type (flat wire). With two grippers holding two plastic brooms on worktable, it works continuously under automatic mode, non-stop.

3) This broom filling machine WXD-4A002 processes broom filaments in two colors. The maximum length of filaments (outside holes) allowed is 110mm. However, another machine in different size range could be customized.

4) In program, positions of broom holes are manually entered by hand-controller, one hole by one hole. Hole positions could be deleted, inserted, duplicated, moved.

5) If you are not sure whether this 4-axis plastic broom filling machine WXD-4A002 is the best choice for your case, please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll be so glad to hear from you and try our best to get back to you with a professional solution at the earliest.

Technical Parameters of CNC 4-Axis Plastic Broom Filling Machine WXD-4A002

Maintenance of CNC 4-Axis Plastic Broom Filling Machine WXD-4A002

1) Operator should often add lubrication oil to the working parts of this plastic broom filling machine, so as to decrease abrasion.

2) Operator should regularly check each part of this 4-axis broom filling machine to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this 4-axis broom filling machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.