Home

Which Brushes Can WXD-5A5H01 Make?

General Introduction of CNC 5-Axis 5-Head Spherical Toilet Brush Making Machine With Safety Cover WXD-5A5H01 

1) If you want to make spherical toilet brushes, hockey-style toilet brushes, round ceiling-cleaning brushes or just other similar round brushes, and if all your plastic brush bases are just moulded without holes, this CNC 5-axis 5-head machine could be one of your choices. Equipped with three drilling-heads and two tufting-heads, it drills holes and fills holes with filaments synchronously.

2) This WXD-5A5H01 brings high working efficiency. With six grippers holding six brushes on worktable, it finishes two toilet brushes within a working cycle, which is twice that of a 5-axis 3-head machine.

3) As a 5-axis machine, it's the most flexible one.

Equipped with a round worktable, it can make almost all kinds of spherical brushes, such as round toilet brushes, hockey-style toilet brushes, semicircle toilet brushes, ceiling-cleaing brushes and other similar round brushes in rated size range. However, if installing a flat worktable instead of the round one, it can make many different brush models with flat, cureved or fan-shaped surfaces, such as flat wood brushes, curved brooms or fan-shaped brooms, etc.

4) It's equipped with automatic vacuum cleaner and manual lubrication system. The tufting method is staple-type (round wires).

5) In program, all the positions of holes are divided averagely by "Divide" button, operator just need enter positions of the first hole and the last hole on each circle, which is quite simple and easy. There is no need to confirm the hole positions one hole by one hole.

6) Not knowing whether this 5-axis 5-head machine could perfectly meet your requirements and having some questions or doubts? Please do not hesitate to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll try our best to get back to you with a professional solution at the earliest.

Technical Parameters of CNC 5-Axis 5-Head Spherical Toilet Brush Making Machine With Safety Cover WXD-5A5H01

Maintenance of CNC 5-Axis 5-Head Spherical Toilet Brush Making Machine With Safety Cover WXD-5A5H01

1) Operator should often add lubrication oil to the working parts of this 5-axis 5-head toilet brush machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this toilet brush making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.