Home

Which Brushes Can WXD-4A3H04 Make?

General Introduction of CNC 4-Axis 3-Head Spherical Toilet Brush Drilling And Tufting Machine WXD-4A3H04 

1) This WXD-4A3H04 is our latest model designed to produce spherical toilet brushes. If your original plastic toilet brush pieces are moulded without holes, this WXD-4A3H04 would be the perfect choice.

On the contrary, if your original plastic toilet brush pieces are already moulded with holes, welcome to take a look at our 4-axis toilet brush tufting machine WXD-4A009, which is used to fill holes with filaments only, without function of drilling holes.

2) A 5-axis 3-head machine can also make spherical toilet brushes, so what's the difference between this 4-axis 3-head machine and 5-axis 3-head machine?

Please note that this WXD-4A3H04 is designed to make spherical toilet brushes and similar round ceiling-cleaning brushes only, operator cannot use it to produce other different brush models; while a 5-axis 3-head machine can make many other different brush models, on condition that operator changes grippers (fixtures) accordingly, which is actually much more flexible.

However, the advantage is that the working speed of this new model WXD-4A3H04 is indeed much faster than that of our 5-axis 3-head machine. Its fastest speed is 5 holes per second.

3) After finishing tufting filaments, some filaments are a little longer and some are a little shorter, therefore a toilet brush trimming machine is needed to cut the filament-ends, in order to keep all the filament-ends flat and neat.

4) The filament-box can hold filaments in two colors; and the maximum length of filaments (outside holes) allowed is 120mm. (Machine that processes very long filaments could be customized)

5) As for the tufting method, it's staple-type (round wire), however, we could also make a flat-wire one, if required by customers.

6) It's also equipped with automatic vacuum cleaner and manual lubrication system.

7) Still have many further questions and doubts regarding this 4-axis 3-head toilet brush making machine? Please do not hesitate to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll do our best to get back to you with a professional proposal.

Technical Parameters of CNC 4-Axis 3-Head Toilet Brush Drilling And Tufting Machine WXD-4A3H04

Maintenance of 4-Axis 3-Head Toilet Brush Drilling And Tufting Machine WXD-4A3H04

1) Operator should often add lubrication oil to the working parts of this 4-axis 3-head toilet brush machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this toilet brush making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.