Besides X-axis, Y-axis and Z-axis, a 4-axis machine has another axis usually called A-axis, which supports up/down movements of the worktable. So, which brush models are made by 4-axis machines? Spherical toilet brushes, double-side hockey brushes and wavy brooms are the most typical ones. However, you might be interested to know another small tip that a flat broom tufted by a 4-axis machine is far more beautiful than that tufted by a 2-axis machine, because a 4-axis machine can make filaments tilting at different angles which could be adjusted in program, while a 2-axis machine tufts filaments only vertically at 90 degrees.
-
CNC 4-Axis Plastic Broom Filling Machine WXD-4A002 (Flat-Wire)
Is it possible to use only a machine to produce most broom models in the market? Yes, absolutely! Flat brooms, curved brooms, fan-shaped brooms and even wavy brooms, all these different broom models could be made on this CNC broom filling machine. -
CNC 4-Axis Broom Tufting Machine For 180mm Filaments WXD-4A004
This is a big-sized 4-axis broom tufting machine, used to make those plastic brooms with very long filaments. The maximum length of filaments (outside holes) it processed is 180mm, while our other standardized machines only process 120mm filaments. -
4-Axis Ball-Type Toilet Brush Tufting Machine With Side Worktable WXD-4A009
This is the latest model of CNC 4-axis toilet brush tufting machine with side worktable, the tufting method is anchor-type (flat wire). The major difference between WXD-4A001 and WXD-4A009 is the direction of worktable. Click to see its overall technical details. -
4-Axis Plastic Broom Tufting Machine With Safety Cover WXD-4A003
With safety cover, this WXD-4A003 is used to make those quality brooms which are thick and heavy. There are two grippers holding two brooms on worktable, which are tufted in turn. This is a standardized one, the maximum length of filaments (outside holes) allowed is 120mm. -
CNC 4-Axis Double-Side Hockey Brush Tufting Machine With Side Worktable WXD-4A007
It's a CNC 4-axis double-side hockey brush tufting machine of the latest style, with side worktable, also with servo motors, its fastest tufting speed is 6 holes per second. In program, hole positions are entered by hand-controller, one hole by one hole. -
CNC 4-Axis Round Toilet Brush Tufting Machine WXD-4A001
This is a typical 4-axis toilet brush tufting machine with servo motors. With two grippers holding two brushes on worktable, the machine tufts toilet brushes continually, non-stop. The hole positions are manually entered by hand-controller, one hole by one hole. -
CNC 4-Axis Disk Brush Tufting Machine (Staple-Type) WXD-4A008
It's a popular model for making industrial disk brushes. The maximum diameter of disk allowed is 500mm, other size could be customized. Filaments are either vertical to the brush surface at 90 degrees or tilting at other angles, it's optional. -
CNC 4-Axis Double Hockey Brush Tufting Machine WXD-4A006
This WXD-4A006 is very popular among Indian customers. With two grippers holding two brushes on worktable, it tufts hockey brushes continually under "Automatic Mode", non-stop. Please note that the plastic hockey brush pieces should be molded with holes in advance. -
4-Axis 2-Head Tufting Machine Making Brooms With 260MM Filaments WXD-4A2H02
How to increase the output of brooms? This WXD-4A2H02 might be your answer! It has two tufting-heads, making two brooms at the same time! However, it requires that the operator should have rich experience in adjusting spare parts of brush tufting machines. -
CNC 4-Axis 3-Head Disk Brush Making Machine With Safety Cover WXD-4A3H03
If your original plastic/wood disk brush pieces are molded without holes, this WXD-4A3H03 could be your best choice! The maximum diameter of disk brush piece it processed is 500mm, other size could be customized. It's equipped with automatic vacuum cleaner. -
4-Axis 3-Head Spherical Toilet Brush Drilling And Tufting Machine WXD-4A3H04
Please note that this new model WXD-4A3H04 is designed to make spherical toilet brushes and similar round ceiling-cleaning brushes only, operator cannot use it to produce other different brush models. It's also equipped with automatic vacuum cleaner. -
4-Axis 3-Head Broom Drilling And Tufting Machine With Safety Cover WXD-4A3H02
This WXD-4A3H02 is used to make quality brooms with flat surfaces only. As a 4-axis machine, holes and filaments are made tilting at different angles, which is adjustable. After finishing a broom, it automatically stops to let operator change broom pieces on worktable. -
CNC 4-Axis 4-Head Roller Brush Drilling Machine With 8 Grippers WXD-4A010
WXD-4A010 is equipped with 4 drilling-heads and 8 grippers holding 8 roller brush pieces on worktable, it's used to drill holes for small plastic/wood roller brushes, and the fastest drilling speed is 7 holes per second. Operator needs to use another tufting machine to fill filaments.
Guangdong Wangxinda Machines Co., Ltd. --- China's Leading Factory Of CNC Brush Machines
Contact: Ms Chloe Wong, Int'l Sales Email: chloe@brushmachine1.com Mob / WeChat / WhatsApp: 0086 136 2276 8856 QQ: 710632185
Contact: Mr Hase Chen, Int'l Sales Email: hase@brush-machine.com Mob / WeChat / WhatsApp: 0086 182 1860 2158 QQ: 529220975
Telephone/Fax: 0086 20 86328033 English Web: www.brushmachine1.com Chinese Web: www.brushmachine1.com/cn
Address: Room 101, No. 6 Baihualing Industrial Park, No. 1 Baihuahaoyuan Street, Wanggang, Baiyun District, Guangzhou, Guangdong, China. P.C.: 510440
Guangdong Wangxinda's New Website With Chinese Version, Launched In May 2017.
粤ICP备19161008号
