Home

Please kindly wait for a moment. After it finishes downloading, you'll be able to watch the video smoothly. If the downloading is interrupted, please just refresh the page. Thanks for your patience!

It's a CNC 2-axis 3-head flat brush making machine, used to make those small flat brushes, such as snow-cleaning brushes, baby-cleaning brushes, wood shoe brushes, etc. Please kindly note that holes drilled by this machine are vertical to the brush surface at 90 degrees only, holes can't be tilting. (If you need holes tilting at different angles, a 5-axis 3-head machine would be your best choice)

Three grippers are installed on worktable. When this 2-axis 3-head machine is working, in turns, it always processes on two grippers only, another gripper is left unprocessed, so that operator could pick out the finished brush from it and put in another new brush piece to be processed. Please watch the video demonstration, you'll fully understand its working principle.

Really interested in this CNC 2-axis flat brush making machine and have some further questions? Please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll try our best to get back to you as soon as possible.