Home

Which Brooms Can WXD-4A3H02 Make?

General Introduction of CNC 4-Axis Broom Tufting Machine WXD-4A3H02 

1) This WXD-4A3H02 is used to make quality brooms with flat, curved and fan-shaped surfaces. As a 4-axis machine, holes and filaments are made tilting at different angles, which is adjustable.

2) With two drilling-heads and a tufting-head, drilling holes and tufting filaments are done synchronously. However, after finishing a broom, it automatically stops to let operator take away the finished broom and put into a new broom piece to be processed, as it's equipped with only two grippers on worktable. Please click the "Video Demo" button above to see how it makes plastic brooms, you'll then fully understand its working principle.

3) It's equipped with automatic vacuum cleaner and manual lubrication system.

4) Hole positions on broom pieces are divided averagely by "Divide" button in program, operator just need confirm the positions of the first hole and the last hole on each line, which is simple and easy.

5) Feeling quite interested in this 4-axis 3-head broom making machine but having some further questions? Please do feel free to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll try our best to get back to you at the earliest.

Technical Parameters of CNC 4-Axis 3-Head Broom Machine With Safety Cover WXD-4A3H02

Maintenance of 4-Axis 3-Head Broom Machine With Safety Cover WXD-4A3H02

1) Operator should often add lubrication oil to the working parts of this broom making machine, so as to decrease abrasion.

2) Operator should regularly check each part to see whether there is a loose screw, and please make sure to tighten it, if he finds a loose one.

3) Please keep guide rails and ballscrews clean, and make sure that there is no scrap sticking on them, so as not to decrease the precision.

4) Be sure that the electric box works under ventilative conditions; do not put this 4-axis broom making machine under humid or high-temperature conditions; do not shake the electric box.

5) Please keep electric box far away from magnetic field, otherwise it will be probably out of control.

6) Be sure that all cables connect correctly. Red, blue and yellow cables connect with three-phase 380V wires, green cable connects with neutral wire, yellow-green cable connects with earth wire. Plugs are numbered as "1, 2, 3, 4 , 5", "1, 2, 3" are for 3-phase 380V wires, "4" is for neutral wire, "5" is for earth wire.

7) The working voltage should be stable, around AC380±10V; over-voltage will probably cause the ruin of electronics.

8) Do not knock at the touchable screen with hard articles, otherwise it'll decrease its sensibility or even break the screen. Do not drag wires rudely, either.

9) Please note that there is high-voltage electricity inside electric box. If it is out of order, only professional technicians are allowed to check and dismantle it. Non-professionals are prohibited to dismantle it, so as to avoid getting an electric shock and the ruin of data.