Home

Please kindly wait for a moment. After it finishes downloading, you'll be able to watch the video smoothly. If the downloading is interrupted, please just refresh the page. Thanks for your patience!

It's a CNC 2-axis 3-head machine making elliptical wood scrub brushes with white filaments. There are three grippers holding three wood scrub brushes on worktable. It works continually under "Automatic Mode", non-stop.

Please note that this 2-axis 3-head machine makes flat brushes only, all the holes and filaments are made vertical at 90 degrees, they cannot tilt at other angles. If you'd like to make brushes with holes tilting at different angles, a 5-axis 3-head machine is recommended.

However, to gain higher working efficiency, a 2-axis 5-head wood brush making machine is recommended, of which the capacity is twice that of a 2-axis 3-head machine.

Feeling quite interested in this 2-axis 3-head wood brush making machine, but have some further questions? Please do not hesitate to contact us at chloe@brushmachine1.com or just leave a message on this page, we'll be so glad to get back to you at the earliest.